9.2 MESSAGES
MESSAGE
Link Error
9.3 ALARMS
If the electronic board needs to give some information to the user, it does so through text messages that appear on the
screen.
In this same way it will indicate when there is an anomalous situation in the operation of the boiler, showing the ErXX code
in the upper right of the screen as shown below, also when it shows this code it is also accompanied by an acoustic signal.
All errors send the boiler the status "Lock".
ALARM
DESCRIPTION
CODE
Body Temperature Safety
Er01
Thermostat Intervention
MESSAGE DESCRIPTION
No communication between the control panel and
the electronic board.
•
There has been a prolonged
power outage.
•
Water
correctly
installation
40
POSSIBLE CAUSE
does
not
circulate
through
the
SOLUTION
•
Remove power and turn it back
on. If the error continues, notify
S.A.T.
SOLUTION
Review the installation. To remove
the error wait for the boiler to cool,
reassemble thermostat and
then reset the error. If this alarm
is repeated often, or it is not
possible to reset, notify the S.A.T.