Table of Contents
Advertisement
MANUAL ENDLESS LOADING
Manual Auger Charging
Manual Auger Charging
At the first ignition of the boiler, before proceeding to make the ignition, we must make a manual loading of the auger.
As shown in the images above, a countdown appears that lasts up to 10 minutes to do the manual loading of the auger.
Once the charge has been done, we stop the counter and proceed to the ignition.
Manual loading of the auger should also be done when the hopper has completely run out of fuel or when cleaning
and maintenance is done.
RESET SERVICE
Reset Service
Reset Service
When the display screen displays "Clean" alternately or permanently at the top of the control panel. This message will
appear every 150 hours and the tasks to be performed will be the cleaning of the brazier, the ash drawer and
the reset in the control panel as shown above.
08:36 Thu 09 Sep 2021
29
Manual Auger Charging
Manual Auger Charging
09:59
º
Clean
º
Reset Service
Reset Service
Advertisement
Table of Contents
