Testing For Continuity; Measuring Ac And Dc Voltage; Using Auto Volts Selection (110 Plus Only) - Fluke 110 PLUS Manual

110 PLUS and 115
Users Manual

Testing for Continuity

The continuity function works best as a fast,
convenient method to check for opens and shorts.
For maximum accuracy in making resistance
measurements, use the Meter's resistance (e)
function.
12
edy06f.eps
Note

Measuring AC and DC Voltage

Volts AC

Using Auto Volts Selection (110 PLUS only)

With the function switch in the  position, the Meter
automatically selects a dc or ac voltage measurement based on
the input applied between the V or + and COM jacks.
This function also sets the Meter's input impedance to
approximately 3 kΩ to reduce the possibility of false readings
due to ghost voltages.
Volts DC
V
edy03f.eps