Power-Up Options - Fluke 110 PLUS Manual

110 PLUS and 115
Users Manual
When you turn the Meter on, it defaults to Autorange and Auto
is displayed.
1. To enter the Manual Range mode, press
displayed.
2. In the Manual Range mode, press
range. After the highest range, the Meter wraps to the lowest
range.
You cannot manually change the range in the MIN
MAX AVG or Display HOLD modes.
If you press while in MIN MAX AVG or
Display Hold, the Meter beeps twice, indicating
an invalid operation and the range does not
change.
3. To exit Manual Range, press
turn the rotary switch. The Meter returns to Autorange and
Auto is displayed.
10
 . Manual is
to increment the

Note
 for at least 1 second or

Power-Up Options

To select a Power-Up Option, hold down the button indicated in
the following table while turning the Meter on. Power-Up Options
are canceled when you turn the Meter off and when sleep mode
is activated.
Button
Turns on all display segments.

Disables beeper.  is displayed when

enabled.
Enables low impedance capacitance
measurements.  is displayed when

enabled. See page 14.
Disables automatic power-down ("Sleep

mode").  is displayed when enabled.
Disables auto backlight off.  is displayed

when enabled.
Power-Up Options