Table of Contents
Advertisement
PROGRAMMING BACKLIT BRIGHTNESS
◆
Default setting is "2".
1
When the power
is off
5
The numeric values
are displayed.
When batteries are running low,
displayed and the power is automatically turned off.
Immediately replace with new batteries (all 4 batteries). Do not apply excessive force to the
measuring section when replacing batteries.
• The power doesn't turn on.
Insert new 4 size AA (LR6) batteries. Be sure that the polarity of the batteries is set properly.
or
•
appears on the display.
The scale needs to be repaired. Please contact your retailer.
•
appears on the display.
Place the test weight AFTER
If it doesn't work, the scale needs to be repaired. Please contact your retailer.
•
appears on the display.
Place the gem cup BEFORE
If it doesn't work, the scale needs to be repaired. Please contact your retailer.
2
While pressing
MODE press
ON/OFF.
6
0
4
1
3
2
Press the TARE to
cycle through the
backlit options.
BATTERIES REPLACEMENT
is displayed. When batteries are running out,
TROUBLE SHOOTING
blinks.
blinks and do not remove it until calibration is complete.
3
Press CAL to display
.
7
When you have
made your selection,
press MODE to
confi rm.
4
Press MODE to
confi rm.
8
Setting is fi nished.
is
7
Advertisement
Table of Contents
