Maintenance; Single/Double Propeller Maintenance; Product Disposal - Quick BTQ Series Installation And User Manual

7 - Maintenance

7.0 - Single/double propeller maintenance

Quick Thrusters are made in materials that are resistant to the sea environment: in any case, it is indispensable to periodically
®
remove deposits that form on the outer surfaces to avoid corrosions and obstructions with consequent system inefficiency.
WARNING: make sure that the power supply to the hydraulic motor is not switched on when maintenance
operations are carried out.
DEPENDING ON USE, PERIODICALLY CHECK THE TIGHTNESS OF THE OIL SEALS AND REPLACE THEM IF
NECESSARY.
Dismantle once a year, following the points below:
• Clean propeller, tunnel and gearleg.
• Replace the anode (carry out this operation more often if needed).
• Replace the propeller if damaged or worn out.
• Check the tightness of all screws.
• Ensure that there is no water seepage inside.
• Check that all electrical connections are well tightened and oxide-less.
• Check that the batteries are in good conditions.

8 - Product disposal

8.0 - Product disposal
As with installation, at the end of this product life, dismantling must be carried out
by qualified personnel.
This product is made up of various materials, some can be recycled and others must be suitably disposed of; enquire about the
recycling or disposal systems provided for by local regulations for this product category.
Some parts of the product may contain pollutants or hazardous substances that, if dispersed, may be harmful to the
environment and human health.
As indicated by the symbol on the side, it is forbidden to dispose of this product as domestic waste.
Separate the products for disposal in accordance with the regulations in force in your area or return the product to
the seller when purchasing a new equivalent product.
Local regulations may impose severe penalties for the improper disposal of this product.
QUICK BTQSeries INSTALLATION AND USER'S MANUAL - REV003A
BTQ Series
EN
BTQ Series
17