Btq 110/125 Gearleg And Motor Support Flange; Btq110/125 Propeller Assembly - Quick BTQ Series Installation And User Manual

4 - Installation
EN

4.3 - BTQ 110/125 Gearleg and motor support flange

• Fit the gearleg with the special seal gasket.
• For further protection against the entry of water, apply
silicone for nautical use around the point of contact between
flange and tube.
• Fasten everything with the flange using the special screws
and washers.
• Insert the motor on the flange by coupling the two elastic
coupling halves. Secure with the 4 screws and washers
supplied.

4.3.0 - BTQ110/125 Propeller assembly

• Insert propeller A on the shaft of gearleg B, secure the
propeller with the self-locking nut C, insert anode D and lock it
with the other self-locking nut C.
1
4
5
6
WARNING: on conclusion of assembly, make sure
that the propeller is exactly positioned at the central
point of the tunnel.
12
12
3
2
7
10
8
9
9
8
QUICK BTQSeries INSTALLATION AND USER'S MANUAL - REV003A
ELASTIC
COUPLING
HALVES
ELASTIC
COUPLING
HALVES
C D
C
8
A
B
BTQ Series