Configure Area Code Set-Up - Nortel 2002 User Manual

Configure options on the IP Phone 2002

Configure Area Code set-up

The Area Code set-up menu enables a user to save up to 3 area codes.
When an incoming call arrives with an area code that matches one of the
3 stored area codes, the incoming call number is re-ordered to display the
telephone number followed by the area code (as opposed to the area
code followed by the telephone number). This re-ordering is also
performed when a user scrolls through their Callers List. To configure the
area code, press the
Telephone Option
To configure default area codes (3 maximum):
48
Services key and select
menu.
1. Press the
scroll and highlight
2. Press the
3. Press the
scroll and highlight one of the following:
— Area Code # 1
— Area Code # 2
— Area Code # 3
4. Press the
5. Use the dialpad to enter the number at
the prompt.
Call Log Option
Up/Down navigation keys to
Area Code
Select key.
Up/Down navigation keys to
Select key.
from the
Setup.