Anti-Static Measures - NEC Express5800 Series User Manual

ANTI-STATIC MEASURES

The Tape Blade contains electronic components sensitive to static electricity. Avoid failures caused
by static electricity when installing or removing any optional devices.
Wear a wrist strap (an arm belt or anti-static glove).

Wear a wrist strap on your wrist. If no wrist strap is available, touch an unpainted metal
part of the cabinet before touching a component to discharge static electricity from your
body.
Touch a metal part regularly when working with components to discharge static
electricity.
Select a suitable work space.

– Work with the Tape Blade on the anti-static or concrete floor.
– When you work with the Tape Blade on a carpet where static electricity is likely to be
generated, make sure take anti-static measures beforehand.
Use a work table.

Place the Tape Blade on an anti-static mat to work with it.
Cloth

– Do not wear a wool or synthetic cloth to work with the Tape Blade.
– Wear anti-static shoes to work with the Tape Blade.
– Take off any jewels (a ring, bracelet, or wrist watch) before working with the Tape
Blade.
Handling of components

– Keep any component in an anti-static bag until you actually install it to the Tape Blade.
– Hold a component by its edge to avoid touching any terminals or parts.
– To store or carry any component, place it in an anti-static bag.
Upgrading Your Tape Blade
9-3