NEC Express5800 Series User Manual page 39

Indication for the Status LED
The drive status is notified by Status LED.
: OFF : ON
Ready
Fault
LED
LED
(amber)
(green)
 
 
 


blink twice
repeated
  /

 


Maintenance mode
This product has the maintenance function, and enters the maintenance mode when the eject button is
pressed consecutively three times within two seconds.
The customer cannot use the maintenance mode, and do not enter the maintenance mode.
When exiting the maintenance mode, press the eject button for three seconds or longer to return to the
ordinary mode.
Ready Fault
LED LED
(green) (amber)


Single Character Display (SCD)
Status is displayed with a single character on the Single Character Display which is located in front of the
drive as follows. No indication is displayed on the SCD during a normal operation.
Indication of SCD
C
E
F
H
: Blink
Encrypt
LED
(white)
Power is not on.
•

Power is on, and cartridge is inserted.
•

In read or write operation.
•

If cleaning cartridge is being inserted, it is in cleaning operation.
•
("C" is displayed on SCD.)
Cartridge is ready to eject.
•

Press the eject button to eject the cartridge.
Error detected on Tape Blade.
•

Check indication on SCD.
All the data related to cartridge is encrypted.
•

Encrypted cartridge is loaded.
•

Encrypt
LED
(white)
 State of the maintenance mode. (SCD displays "O".)
Status
Cleaning Request
Media Error
Hardware Error
Temperature Error
Action
Clean the drive by the cleaning cartridge.
Cartridge needs to be changed.
Contact a dealer or service representative for assistance.
Operation is interrupted. Please wait until drive
temperature to decrease.
General Description 2-13
Status
Status