Chapter 9 Upgrading Your Tape Blade - NEC Express5800 Series User Manual

Chapter 9
Upgrading Your Tape Blade
This chapter describes optional devices available for the Tape Blade, procedures for install or
removing such optional devices, and notes on using them.
IMPORTANT:
Optional devices described in this chapter may be installed or

removed by any user. However, NEC does not assume any liability
for damage to optional devices or the Tape Blade or malfunctions of
the system resulted from installation by the user. NEC recommends
you ask your service representative for install or removing any
optional devices.
Make sure to use only optional devices and cables authorized by

NEC. Repair of the system due to malfunctions, failures, or damage
resulted from installing such devices or cables will be charged.
When you made any change to the hardware configuration, make

sure to update the system (refer to the manual that comes with your
CPU blade for details.).