Sas Controller; Sas Controller Configurations; Before Installing The Driver - NEC Express5800 Series User Manual

4-2
Configuring Your Tape Blade

SAS Controller

SAS Controller Configurations

This product's configuration is optimized at factory shipment. Normally, reconfiguration is not
necessary, however, if necessary, you can reconfigure this product by using its utility.
Refer to "SAS BIOS - LSI Corp Config Utility -" for the details of the LSI Corp Config Utility.
NOTE: If you fail to boot the system from USB DVD-ROM drive
after installing the Tape Blade, change SAS BIOS configuration
according to "About LSI Corp Config Utility".

Before Installing the Driver

Confirm the version of driver software according to the following procedure:
Windows Server 2003
1.
Run OS and launch Explorer.
2.
Point to "%SYSTEMROOT%\SYSTEM32\DRIVERS\Lsi_sas2.sys" and select
[Properties] on right-click menu.
NOTE:
3.
Click the [Version] tab in [Properties] dialog box of Lsi_sas2.sys.
4.
The version information of Lsi_sas2.sys is displayed.
Confirm the version of driver in [File Version] field.
If the version of driver is 2.0.35.0 or later, you need not to install a driver.
If Lsi_sas2.sys does not exist in your system or the version of driver is older than 2.0.35.0,
you need to install driver. Install the driver according to "Install the Driver".
Generally, SYSTEMROOT is placed in C:\Windows.