5.
Firmly hold the cover, move it slightly toward the rear of the blade, then lift the cover to
remove it from the Tape Blade.
IMPORTANT:
with any electronic components on the Tape Blade.
6.
Make sure the location of mezzanine card slot you are going to install.
7.
From top of the Tape Blade, position the connector of the mezzanine card so that it aligns
the connector of the mezzanine card slot, and insert the mezzanine card straight into the
slot.
Type I
Handle the cover carefully so as not to make it contact
Upgrading Your Tape Blade
Type II
9-7