Sas Bios - Lsi Corp Config Utility; About Lsi Corp Config Utility - NEC Express5800 Series User Manual

SAS BIOS - LSI Corp Config Utility -

The LSI Corp Config Utility is used for setting this product. To start the utility, no special startup
disk is required. It can be started by a simple keyboard operation while the self-diagnosis program
POST is running.
IMPORTANT:
the LSI Corp Config Utility. Therefore, the settings windows may be
different from those in this document. In such a case, contact your
sales agent for details.

About LSI Corp Config Utility

LSI Corp Config Utility is used in the following case.
When you fail to boot the system from USB DVD-ROM drive after installing the Tape
Blade
1.
Start LSI Corp Config Utility.
2.
Select [Global Properties].
3.
Change setting of "Support Interrupt" from "Hook interrupt" (default), to "Bypass
Interrupt hook".
Pause When Boot Alert Displayed
Boot Information Display Mode
Support Interrupt
Restore Defaults
4.
Save changes and exit LSI Corp Config Utility.
This product is delivered with the latest version of
Configuring Your Tape Blade
[No]
[Display adapters & installed devices]
[Bypass interrupt hook]
4-5