Companyflex Converter - bintec elmeg be.IP swift User Manual

numbers will then no longer be available for (incoming) call
distribution to the ISDN lines.
7. Registration behavior
If you have set up multiple Internet connections, you can select
one of them for the SIP interface binding option; VoIP data
traffic is then transmitted through this interface. By default, the
primary Internet interface is selected here. If you select All sites,
all available Internet interfaces are used for the transfer.

8.4 CompanyFlex Converter

Note
The wizard will only be displayed if a DeutschlandLAN SIP
Trunk is set up on your be.IP swift that has not yet been converted, or
if there are still entries in the list of conversion jobs.
The CompanyFlex converter function enables the conversion of one
or more DeutschlandLAN SIP Trunks into a CompanyFlex SIP Trunk
at any time. When you start the wizard, you will first be shown a list
of existing conversion jobs. Both pending jobs and jobs that have
already been completed are displayed:
If you create a new entry or edit an existing entry, you can select
from the configured DeutschlandLAN SIP Trunks in the SIP Trunk
field. If you activate the Convert immediately button, the conversion
of the port will start immediately as soon as you confirm your entries
Telephony Menu in Operation as a Media Gateway 58