Meaning Of The Leds - bintec elmeg be.IP swift User Manual

3.2 Meaning of the LEDs

STATUS green
green
green
red
red
off
DSL/SFP green
green
green
yellow
off
INTERNET green
red
off
TEL green
red
off
WLAN green
green
yellow
off
SERVICE off
Putting be.IP swift into operation
on Router in operation
rapid WAN auto detection
flashing
slow System software starting
flashing
on The router is booting (approx. 25 s)
or a router error has been detected
(>60 s)
flashing New system software is being
loaded or reset
No power supply available
on DSL connection successfully
established
rapid Executing DSL synchronization
flashing
slow DSL connection established
flashing
on SFP link detected
DSL interface not activated, no SFP
link
on Internet connection successfully
established
on Error while establishing the Internet
connection
No Internet connection
on All telephone numbers registered
on At least one telephone number not
registered
Internet telephony not activated
on WLAN activated
flashing WLAN activating or deactivating
flashing WPS button pressed, waiting for
client connection
WLAN deactivated
Remote maintenance service off /
Automatic configuration (TR-069)
inactive
13