bintec elmeg be.IP swift User Manual page 57

want to connect your device to SWYX SIP servers, you can configure
the necessary entries here:
Confirm your settings with OK.
The SIP settings for registration with SwyxWare are:
1. Registrar
Enter the IP address or domain name (FQDN) of the SIP registrar
(max. 40 characters).
2. Registrar Port
Enter the port over which the data should be transferred.
3. Expire Time
Specify how long the registration should be valid for the
respective con-to (in seconds). Possible values are: 0 ... 99999.
4. User ID
Enter the user ID for authentication.
5. Password
Enter the password (max. 40 characters).
6. Number Assignment
Select those of the configured phone numbers that are to be
used for the connection via a Swyx server. Note that these
Telephony Menu in Operation as a Media Gateway 57