Configuration Of Companyflex Sip Trunk - bintec elmeg be.IP swift User Manual

7.1.3 Configuration of CompanyFlex SIP Trunk

1. For Telephony user name, enter the telephony user name for
authentication from the configuration portal in this format
+49199296xxxxxxxxxxxx@tel.t-online.de .
2. Enter the default Telephony password from the configuration
portal.
3. Enter the CompanyFlex SIP Trunk Registration phone number
from the configuration portal in this format
+49199296xxxxxxxxxxxx.
4. The outbound proxy must contain the 12-digit CompanyFlex-ID
from the configuration portal. be.IP swift creates the necessary
outbound proxy <companyflex-id>.primary.companyflex.de
automatically.
5. If the CompanyFlex SIP Trunk is assigned a Point to Point
number, enter the number in E.164 phone number format without
extension in this field. If there is no assigned Point to Point
number, the field remains empty.
Menu for telephony in operation as a telephone system 27