Pepperl+Fuchs R2-SP-IC Series Manual page 16

Segment Protector
Installation and Commissioning
Mounting the Segment Protector on a DIN Mounting Rail
1. Place the Segment Protector on the DIN mounting rail.
2. Gently press the Segment Protector to the DIN mounting rail until it is locked in place.
The Segment Protector clicks into place.
Click!
DIN Rail Mounting
Ensure that the device coupler is fixed firmly on the DIN mounting rail.
The device coupler must mesh firmly with the DIN mounting rail.
Dismounting the Segment Protector
1. Use a slotted screwdriver to open both latches.
16