Additional Information On Vertical Mounting - Pepperl+Fuchs R2-SP-IC Series Manual

Segment Protector
Installation and Commissioning
3. Make sure that it is locked in place.
4. Remount the T-connector and fasten the retaining screws.
4.1.2

Additional Information on Vertical Mounting

If a Segment Protector is mounted vertically, use end brackets / end clamps on both sides of
the Segment Protector to prevent shifting of the device.
Pepperl+Fuchs recommends using the following Phoenix Contact parts:
Clipfix 35, snap-on end bracket, PHOENIX CONTACT part no: 3022218
■
E/UK, screw-fastening end bracket, PHOENIX CONTACT part no: 1201442
■
For further information please refer to www.phoenixcontact.com.
18
Click!