Initial Inspection - Agilent Technologies 16089E Operation Note

Operation
Introduction
This chapter explains how to use the 16089E Kelvin Clip Leads.

Initial Inspection

The 16089E has been carefully inspected electrically and mechanically before being shipped
from the factory. It should be in perfect physical condition, no scratches, dents or the like, and
they should be in perfect electrical condition. Verify this by carefully performing an incoming
inspection to check the test lead set for signs of physical damage and missing contents. If any
discrepancy is found, notify the carrier and Agilent Technologies. Your Agilent Technologies
sales oce will arrange for repair and replacement without waiting for the claim to be settled.
1. Inspect the shipping container for damage, and keep the shipping materials until the
inspection is completed.
2. Verify that the shipping container contains everything shown in Figure 2-1 and listed in
Table 2-1.
3. Inspect the exterior of the 16089E for any signs of damage.
Description
Kelvin Clip Leads
1
Operation Note
2
1
Agilent internal-only part number .
2
Operation Note is not shown in Figure 2-1.
Figure 2-1. 16089E Product Overview
Table 2-1. Contents of 16089E
2
Agilent Part Number
16089-60005
1
16089-90001
2
Quantity
1
1
Operation 2-1