Table of Contents
Advertisement
www.ti.com
1
Overview
The BP-DAC11001EVM is an easy-to-use platform to evaluate the functionality and performance of the
DAC11001 device. The DAC11001 is a highly accurate, low-noise, voltage-output, single-channel, digital-
to-analog converter (DAC). The DAC11001 is specified monotonic by design, and offers excellent linearity
of less than 4 LSB (max) across all ranges.
The unbuffered voltage output offers low-noise performance (7 nV/√Hz) in combination with fast settling
time (1 μs), making this device an excellent choice for low-noise, high-speed applications. The DAC11001
integrates an enhanced deglitch circuit with range- and code-independent symmetrical ultra-low glitch (1.5
nV-s) to enable clean waveform ramps with ultra-low harmonic distortion (THD).
The DAC11001 device incorporates a power-on-reset (POR) circuit so that the DAC powers on with
known values in the registers. With external references, DAC output ranges from V
achieved, including asymmetric output ranges.
The DAC11001 uses a versatile 4–wire serial interface that operates at clock rates of up to 50 MHz. The
DAC11001 is specified over the industrial temperature range of –40°C to +125°C.
The EVM provides the GPIO and SPI programming interface using a PC-based graphical user interface
(GUI). This EVM requires the MSP-EXP432E401Y Launchpad for interfacing with the PC-based GUI.
1.1
Kit Contents
Table 1
details the contents of the EVM kit. Contact the TI Product Information Center nearest you if any
component is missing. TI highly recommends that the user verify latest versions of the related software at
the TI website, www.ti.com.
The MSP-EXP432E401Y Launchpad can be purchased from the
www.ti.com.
1.2
Related Documentation from Texas Instruments
The following document provides information regarding Texas Instruments integrated circuits used in the
assembly of the BP-DAC11001EVM. This user's guide is available from the TI web site under literature
number SLAU806. Any letter appended to the literature number corresponds to the document revision that
is current at the time of the writing of this document. Newer revisions may be available from the TI web
site at http://www.ti.com/, or call the Texas Instruments Literature Response Center at (800) 477-8924 or
the Product Information Center at (972) 644-5580. When ordering, identify the document by both title and
literature number.
SLAU806 – October 2019
Submit Documentation Feedback
Table 1. Kit Contents
Item
BP-DAC11001EVM BoosterPack
Table 2. Required Components Not Included With Kit
Item
MSP-EXP432E401Y Launchpad
Table 3. Related Documentation
Document
DAC11001
product data sheet
Copyright © 2019, Texas Instruments Incorporated
Quantity
1
Quantity
1
MSP432E401Y tool folder
Literature Number
SLASEL0
Overview
to V
can be
REFPF
REFNF
on
3
BP-DAC11001EVM
Advertisement
Table of Contents
