Table of Contents
Advertisement
System Setup
2
System Setup
2.1
Software Setup
This section provides the procedure for EVM software installation.
2.1.1
Software Installation
The EVM software is compatible with the Windows™ 7, 8, and 10 operating systems. The software is
available on the product folder, and can also be found in the
DAC11001EVM in the GUI Composer Gallery. Use the down arrow symbol to download the software.
There are two downloads: BP-DAC11001EVM GUI and GUI Composer Runtime. Either download both, or
just download the EVM GUI; the runtime file can be downloaded through the EVM GUI during installation.
The software can also be run online; however, only after the firmware and driver are upgraded. After the
software is downloaded onto the PC, navigate to the download folder, and run the BP-DAC11001EVM
software executable, as shown in
When the BP-DAC11001EVM software is launched, an installation dialog window opens and prompts the
user to select an installation directory. If left unchanged, the software location defaults to C:\Program Files
(x86)\Texas Instruments\BP-DAC11001 EVM, as shown in
the GUI Composer Runtime application, the installer also requests for an automatic download from the
web. Select either Install from Web to download and install from the web, or Install from PC and provide
the path to the local file that is already downloaded. The runtime executable also installs the USB drivers,
unless the drivers are already installed.
The software installation automatically copies the required files and drivers to the local machine.
4
BP-DAC11001EVM
Figure
1.
Figure 1. BP-DAC11001EVM Software Setup
Figure 2. Software Installation Path
Copyright © 2019, Texas Instruments Incorporated
GUI Composer
Gallery. Search for BP-
Figure
2. If there is no previous installation of
Submit Documentation Feedback
www.ti.com
SLAU806 – October 2019
Advertisement
Table of Contents
