Transmitter Phase Adjustment - RadioLink A560 Instruction Manual

（3）Rudder Phase
Toggle the rudder joystick to left, rudder servo(vertical tail) turns to left; toggle the joystick to
right, rudder servo(vertical tail) turns to right, meaning the rudder phase is correct.
（4）Throttle Phase
Toggle the throttle joystick to the bottom and the motor stays still. Gently push the throttle stick
upward, motor moves faster and faster, meaning throttle servo correct.

5.1.3 Transmitter Phase Adjustment

If transmitter phase is reversed, the phase needs to be adjusted by the flight controller. Press
the button on the front of the flight controller Byme-A to change the phase. The adjustment
method is as follows:
No. Channel
1 AIL
2 ELEV
3 THRO
4 RUDD
If phase is reversed
Short press the button once
Short press the button twice
N/A
Short press the button four times
Green LED to CH1 on/off
Green LED to CH2 on/off
Green LED always on
Green LED to CH4 on/off
19
RadioLink Electronic Ltd
www.radiolink.com
Indicator LED