Center Mount Bracket (Code Eptwcbrkm - Optional) - ProLights EclPanel TWCMini2X1 User Manual

CENTER MOUNT BRACKET (CODE EPTWCBRKM - OPTIONAL)

1
1
2
3
5
6
4
Remove the bracket, (see point 1, paragraph 13). Mount the center mounting bracket as follows:
1. Mount the prevent slice (1) on the bracket holder part using the two screws (2).
2. Mount the center mount bracket (3) on the prevent slice (2) using the carriage screw (4).
3. Mount the plastic cover (5) on the center mount bracket with the screw (6).
NOTE: the assembly operation must be carried out on both sides.
NOTE: To remove the accessory, reverse the procedure.
Fig. 12
PROLIGHTS - Ecl Panel TWCM2X1
47