Connection To The Mains Supply; Start Up; Connect And Disconnect Power From The Product - ProLights EclPanel TWCMini2X1 User Manual

4 - CONNECTION TO THE MAINS SUPPLY

WARNING: For protection from electric shock, the fixture must be earthed!
The product is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz
AC power source from 100-240 Volts.
If you need to install a power plug on the power cable to allow connection to power outlets, install a
grounding-type (earthed) plug, following the plug manufacturer's instructions. If you have any doubts
about proper installation, consult a qualified electrician.
T max power consumption is 130W.
Core (EU)
Brown
Blue
Yellow+green

5 - START UP

CONNECT AND DISCONNECT POWER FROM THE PRODUCT

To apply and disconnect power to the product:
• Check that the product is installed and secured as indicated in the Safety Informations, and that
personal safety will not be put at risk when the fixture lights up.
• Connect the power connector into the Mains input socket (100-240 VAC-50/60 Hz).
• The product is then ready for its operations and can be controlled through the available input sig-
nals on board.
• To disconnect power from the product, disconnect the Mains from the socket.
• In case you wish to run the product through an external battery, then connect the product to an
external battery (24-36V) into the dedicated XLR4p socket; to disconnect power, disconnect the
Battery from the socket.
• In case you wish to run the product through an external PU, then connect the product to an external
PU (48V) into the dedicated XLR3p socket; to disconnect power, disconnect the PU from the socket.
08
Core (US)
Black
White
Green
PROLIGHTS - Ecl Panel TWCM2X1
Connection Plug terminal marking
Live
Neutral
Earth
L
N