10 - SHORTCUT
KEYS
UP + DOWN
after power on
DOWN
+ ENTER after power on
UP / DOWN using Stand
Alone mode
ENTER
using
Stand
Alone mode
ENTER + UP
then power on
11 - DIMMER CURVES
Five dimming modes are available:
1. LINEAR - The increase in light intensity appears to be linear as DMX value is increased.
2. S-CURVE - Light intensity control is finerat at low levels and high levels and coarser at medium levels.
3. SQUARE LAW - Light intensity control is finer at low levels and coarser at high levels.
4. INVERSE SQUARE LAW - Light intensity control is coarser at low levels and finer at high levels.
5. HIGHRES@LOW - Very Fine control at low light intensity and coarser at medium and high levels.
1
MODE
Flip Display
Enter Standalone Mode
Stand Alone mode
Stand Alone mode
Bootloader
LINEAR
DMX %
PROLIGHTS - Ecl Panel TWCM2X1
DESCRIPTION
Directly flip display and knob order without enter inside
menu.
Enter Stand Alone Mode when DMX signal is absent.
Scroll through different Stand Alone modes.
Scroll through different parameters of the selected mode.
Force firmware upgrade.
2
S-CURVE
DMX %
19