Table of Contents
Advertisement
6 - PRODUCT OVERVIEW
1. BRACKET.
2. USER INTERFACE with display and buttons for access to the control panel functions.
3. HIGHLIGHT button: turns the fixture temporary on for focusing without data signal.
4. ROTATORY KNOBS for product stand alone control operations.
5. ANTENNA of Wireless DMX Transceiver internal module.
6. TILT KNOB: for fixture tilt adjustment and fastening.
7. DC IN (3-pole XLR): for battery within 48 V range, 1 = V -, 2 = V+, 3 = N/C.
8. BATTERY IN (4-pole XLR): for battery within 24-36 V range, 1 = V -, 2 = N/C, 3 = N/C, 4 = V+.
9. DMX IN (5-p XLR): 1 = GND, 2 = sign-, 3 = sign+, 4 N/C, 5 N/C.
10. DMX OUT (5-p XLR): 1 = GND, 2 = sign-, 3 = sign+, 4 N/C, 5 N/C.
11. MAIN FUSE HOLDER: replace a burnt-out fuse by one of the same type only (250V,T3.15A, Ø5X20). ).
12. POWER IN: for connection to the Mains 100-240V~/50-60Hz.
13. POWER OUT: power output for connection of multiple units in series.
14. ETHERCON CONNECTORS IN / OUT: for Ethernet protocols signal.
3
4
5
6
2
1
1
7
8
9
10 11 12
13
14 14
Fig. 03
PROLIGHTS - Ecl Panel TWCM2X1
09
Advertisement
Table of Contents
