Canopy Hatch Installation - Casablanca III Owner's Manual

E
STRADA
Step 5. Tuck the wires into the canopy
with the wire nuts pointed upwards, so
that the WHITE and BLACK wires are on
opposite sides of the canopy and all wires
are clear of the canopy opening.
Step 6. Install canopy hatch with the last
canopy screw and lock washer. To do this,
tilt the fan body away from the hatch
opening.
Using the screwdriver, tighten the screws
firmly by hand only,
Step 7. Straighten the fan, then check
to ensure that there is no movement be-
tween the canopy and ceiling or Hang-Tru
ball and top support shaft.
BLADE TO BLADE HOLDER INSTALLATION
BLADE SCREW
(4 PER BLADE)
RUBBER GROMMET
(4 PER BLADE)
Step 8. Insert a rubber grommet through
each blade hole of every blade. Inspect
both sides of the blade to assure that
the lips of the grommet are fully engaged.
CORRECT INSTALLATION
INCORRECT INSTALLATION
6

CANOPY HATCH INSTALLATION

Note: Write down the
Serial Number and the
model number for future
reference.
BLADE & BLADE HOLDER HARDWARE
BLADE
HOLDER
BADGE
RUBBER GROMMET INSTALLATION
CANOPY
HATCH
LOCK
WASHER
CANOPY
SCREW
TILT THE
FAN TO
INSTALL
LAST
CANOPY
SCREW
BLADE HOLDER
SCREW
(2 PER BLADE)