Welding; Washing The Lift Truck - Manitou MLT 845 120 LSU 3-E3 Series Operator's Manual

WELDING WELDING
- Disconnect the battery before any welding operations on the lift truck. - Disconnect the battery before any welding operations on the lift truck.
- - When carr When carr ying out electric welding work on ying out electric welding work on
welded, so as to avoid high tension current passing through the alternator. welded, so as to avoid high tension current passing through the alternator.
- - Never carr Never carry out welding or work y out welding or work
cause the tyre to explode. cause the tyre to explode.
- - If the lift truck is equipped with an electronic control unit, disconnect this before starting to weld, to avoid the risk of causing If the lift truck is equipped with an electronic control unit, disconnect this before starting to weld, to avoid the risk of causing
irreparable damage to electronic components. irreparable damage to electronic components.
WASHING THE LIFT TRUCK WASHING THE LIFT TRUCK
- Clean the lift truck or at least the area concerned before any intervention. - Clean the lift truck or at least the area concerned before any intervention.
- Remember to close and lock al - Remember to close and lock
- During washing, avoid the articulations and electrical components and connections. - During washing, avoid the articulations and electrical components and connections.
- - If necessary, protect against penetration of If necessary, protect against penetration of water
particularly electrical components and connections and the injection pump. particularly electrical components and connections and the injection pump.
- Clean the lift truck of any fuel, oil or grease trace. - Clean the lift truck of any fuel, oil or grease trace.
FOR ANY INTERVENTION OTHER THAN REGULAR MAINTENANCE, CONSULT YOUR DEALER. FOR ANY INTERVENTION OTHER THAN REGULAR MAINTENANCE, CONSULT YOUR DEALER.
the lift truck, connect the negative the lift truck, connect the negative
which gives off heat on an which gives off heat on an ass
all accesses to the lift tr l accesses to the lift truck (doors, windows, cowls...). uck (doors, windows, cowls...).
water, steam or cleaning agents, components sus , steam or cleaning agents, components
https://www.forkliftpdfmanuals.com/
1-24 1-24
cable from the equipment directly to cable from the equipment directly to
assembled tyre. The heat embled tyre. The heat would increase the pressure would increase the pressure
the part being the part being
which could which could
susceptible of being damaged, ceptible of being damaged,