Connecting The Ethernet Cable - Toshiba nv Series Instruction Manual

Chapter 2 Installation and Wiring
2.2

Connecting the Ethernet Cable

Connect the Ethernet cable (Category 6/Category 5e twisted pair cable) to
the FN812 module.
1000BASE-T/100BASE-TX/10BASE-T
Connect the cable in the following steps.
10
6F8C1361
Before installation or wiring, remove the static
CAUTION
electricity from your body.
The static electricity accumulated in the human body
may cause failure of the product.
Do not touch the cables carelessly.
CAUTION
Applying stress to the cables may cause malfunction or
accidents.
Perform a notification check of the transmission
CAUTION
data in the application level.
When an error occurs such as unable to turn on the
power, stop using and contact one of Toshiba's service
representatives. If you have any question, consult
with one of Toshiba's service representatives.
Connect the Category 6/Category 5e twisted pair cable to the
Ethernet connector (EN-A) (EN-B).
Be aware of the direction of the connector hook.
After inserting the connector, make sure that the cable is locked.
Figure 2-2 Connecting the Category 6/Category 5e twisted pair cable
Mandatory
Prohibited
Mandatory
FN812 module
Ethernet connector
(Moduler connector)