Ethernet Cable Connection; 10Base5 (En711, En721) - Toshiba V Series Operation Manual

4.2 Ethernet Cable Connection

Connect the Ethernet cables (AUI cable: 10BASE5; 3D-2V: 10BASE2; category 5 twisted
pair cable: 100BASE-TX/10BASE-T) to the EN7 or FN modules.
4.2.1

10BASE5 (EN711, EN721)

(1) Push up the slide lock on the Ethernet connector (EN-A or (EN-B) and connect the
AUI cable.
(2) Push the slide lock down to lock the AUI cable.
Check that the AUI cable connector has been fixed by the slide lock.
(3) Mount the connector clamp and fasten the AUI cable connector to the EN7 module.
Fasten the connector clamp with two M3 screws, using a Phillips screwdriver.
(4) Clamp the AUI cable.
AUI cable
6F8C0878
Figure 4-2 Connecting AUI Cable
Figure 4-3 Fastening the Connector with Clamp
4.2 Ethernet Cable Connection
EN7 module
Ethernet connector
(slide lock)
AUI cable
EN7 module
Connector clamp
4
49