Toshiba nv Series Instruction Manual page 6

Ethernet (fn812) module
Hide thumbs Also See for nv Series:
Table of Contents

Advertisement

3.
Safety Precautions on Replacement of Life Limited Parts
If the device has power fuses or
alarm fuses, when replacing them,
Required
turn off the switch of the device.
Otherwise, it may cause an electric
shock or fire.
4.
Safety Precautions on Daily Use
Do not touch the terminals of the
module and unit during
No touch
energization.
It may cause an electric shock.
Do not modify, repair, disassemble,
or adjust the device, module, or
Prohibited
board.
It may cause an electric shock, fire,
injury, or failure.
Upon faulty operation or failure,
contact Toshiba's branch office or
service offices.
Before using, check that the power
capacity, frequency, voltage, and
Mandatory
regulation comply with the device
specifications.
If not, it may cause damage of the
device, or fire due to overheat, as well
as not obtaining the original
performance of the device.
iv
6F8C1361
WARNING
WARNING
When the ambient or internal
temperature of the device rises
Mandatory
abnormally or failure occurs in the
device, stop using the device, turn
off the power, and contact one of
Toshiba's service representatives.
Using it as it is may cause fire due to
overheat.
Do not touch the terminals of the
module and unit during
No touch
energization.
It may cause an electric shock.
The power supply module is for the nv
series only. Do not use it alone for any
other purposes.

Advertisement

Table of Contents
loading

Table of Contents