Ftp - HikRobot SC7000 Series User Manual

trigger signals.
Note
The trigger signal within the delay you set can use Cache Enable function only.
In display interface, enable Display Text to set text's color, front size, transparency, position X, and
position Y.

8.5.6 FTP

In FTP communication, set the image file of the device as Image Source, and set the previous
module status as Input Status.
When using FTP as communication tool, you need to set target IP, target port, user name,
password, image saving, frame index, result, start tag and end tag, and separator according to
actual solution demands.
Parameters
Target IP and Port
User Name
Password
Image Saving
Frame No.
SC7000 Series Smart Camera User Manual
Figure 8-31 IO Communication
Table 8-4 Parameter Description
Description
It refers to the IP and Port of FTP server.
Enter user name to log in FTP.
Enter password to log in FTP.
It sets when to save images. It includes no_save, ok_save, ng_save, and
ok&ng_save.
If you use image saving function, you can enable frame index to save the
image frame number.
52