Application; Standard Specifications - SMC Networks AFF50-06-D Operation Manual

2. Application

This product aims at eliminating excess saturated water and solid foreign matter in the air line.

3. Standard specifications

Model No.
Port size
Fluid
Ambient and operating fluid temperature
Proof pressure
Max. operating pressure
Min. operating
pressure of auto drain
Nominal filtration rating
Water droplet removal ratio
Max. air flow capacity
Compressed air purity class
Drain capacity
Bowl material
Weight
Note1) Conditions in accordance with [Test method ISO 12500-3:2009 compliant] in addition to the conditions
above.
- Flow capacity, inlet pressure, and the amount of solid or liquid particles on the filter inlet side are stable.
- New element
Note2) Conditions in accordance with [Test method ISO 12500-4:2009 compliant] in addition to the conditions
above.
- Water droplet on the filter inlet side 33 g/m
(Water droplet indicates condensed moisture. Water vapor which is not condensed is not included.)
- Inlet air temperature: 25
- Flow capacity, inlet pressure, and the amount of water droplets on the filter inlet side are stable.
- New element
Note3) Inlet pressure: 0.7 MPa Flow rate at 20
Note4) Based on ISO8573-1:2010 Compressed air - Part1: Contaminants and purity classes.
The compressed air quality class on the inlet side is [6:8:4].
N.C.
N.O.
Note1)
Note2)
Note3)
Note4)
o
C
o
C, atmospheric pressure, and 65% of relative humidity.
AFF50
3/4，1
-5 to 60
0.15MPa
(99% filtered particle size)
2200L/min(ANR)
ISO8573-1:2010 [4:7:4]
Stainless steel
1.23kg
3
(ANR).
-7-
AFF60
1
Air
o
C (No freezing)
1.5MPa
1.0MPa
0.1MPa
1μm
99%
3700L/min(ANR)
3
100cm
1.46kg