Sanremo F.18 Instruction Booklet page 33

F18
Place 2 cups under the double filter holder, then
press the button to start dispensing double short
espresso coffee.
The selected button remains illuminated for the
entire dispensing, while all other buttons turn off.
When dispensing is concluded, all buttons turn on.
Button for double long coffee (D)
Place 2 cups under the double filter holder, then
press the button to start dispensing double long
black coffee.
The selected button remains illuminated for the
entire dispensing, while all other buttons turn off.
When dispensing is concluded, all buttons turn on.
Button for continuous dispensing/
unit programming (E)
Position a cup of suitable capacity for the desired
coffee quantity under the filter holders.
Press button (E) twice to start dispensing coffee.
EN
Buttons (F) and (G) will flash alternatively for the
entire dispensing, while all others will turn off.
When the desired coffee quantity is reached,
press button (E) again to stop dispensing; after
120 seconds dispensing will stop automatically.
Purge
Remove the filter holder from the unit and press
button (E) once.
Button will become steady on and a small preset
quantity of water will be delivered for two seconds
in order to clean the unit head
Big single cup button
Place a cup under the single filter holder, then
press the button to start dispensing coffee.
The selected button remains illuminated for the
entire dispensing, while all other buttons turn off.
When dispensing is concluded, all buttons turn on.
Big double cup button
Operating the machine
Place a cup under the single filter holder, then
press the button to start dispensing long black
coffee.
The selected button remains illuminated for the
entire dispensing, while all other buttons turn off.
When dispensing is concluded, all buttons turn on.
Water wand (5)
6
5
Position a cup suitably sized for the required
amount of water under the wand.
Press button (4) to begin delivery of hot water
mixed to the required temperature from the
diffuser spout.
Delivery stops automatically at the end of the set
time. Delivery can be stopped by pressing button
(4).
Display
The display is a touch-screen; during normal
operation of the machine the following screen is
shown, while during programming the screens
shown on the display are described in the relevant
paragraph.
96