Avery Dennison ADTP2 Operator's Handbook Manual page 42

T r o u b l e s h o o t i n g
Use this information to solve some common problems.
Proble m
Does not print.
Does not feed.
Partially printed data.
Light/Dark printing or
voids in print.
Serial bar codes print
with voids or do not
scan.
Liner is wrapped around
platen roller.
Blank labels print.
If you cannot fix a problem, call Customer Service.
6-4 Operator's Handbook
Action
Check supply.
Check ribbon.
Press feed.
Check connection to host.
Check supply.
Check ribbon.
Clear jam.
Close printhead completel y.
Clean the printhead.
Resend the batch (print job).
Clean the printhead.
Change supply.
Adjust the print contrast. See "
Adjust the printhead pressure dials. See "
Printhead Pressure
Check ribbon.
Adjust the print contrast. See "
Your System Administ rat or can change the print speed to 2.5
IPS.
Clear the jam.
Clean the platen roller.
Leave the printhead unlatched when printer is unused for
extended periods of time.
Your System Administ rat or should check the format. It may
not be designed for the loaded supply size.
Setting the Print
Dials."
Setting the Print
Contrast."
Adjusting the
Contrast."