Changing The Spray Settings - Croplands WEED-IT QUADRO User Manual

4.6 Changing the spray settings

WEED-IT can be used in various modes:
• Spot plain, see "Spot plain mode" on page 50.
• Spot spraying, see "Spot spraying mode" on page 50
• Full coverage, see "Full coverage mode" on page 52
• Dual function (spot & coverage), see "Dual function" on page 52
• Spot plain Green on Green (optional), see "Plain Green/Green" on page 53.
• Spot spraying Green on Green (optional), see "Spot Green/Green" on page 53.
To change the spray settings:
1. Stop the vehicle.
2. Enter the Service mode. The global information screen opens:
3. Press briefly several times, until menu 104 opens:
4. Use the Up/Down navigation keys to select the Mode parameter, if necessary.
5. Use the Left/Right navigation keys to select the appropriate spray mode.
6. Press the Down navigation key to select the Nozzle parameter.
7. Use the Left/Right navigation keys to select the preferred nozzle type.
30 / 122 | WEED-IT Quadro | User Manual - BT-UMWEEDQ-C