Preparation; Ways Of Preparing A Beverage - Jura GIGA X3 Instructions For Use Manual

2 Preparation

2 Preparation
Ways of preparing a
beverage
16
Basic information about preparing drinks:
U
During the grinding operation you can change the coffee
strength of single products. To do this, move your finger
across the display or turn the Rotary Switch.
U
During preparation you can change the preset amounts (e.g.
amount of water or milk foam). To do this, move your finger
across the display or turn the Rotary Switch.
U
You can stop preparation at any time. To do this, press the
'Cancel' button or the Rotary Switch.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 'Permanent settings in programming mode –
Adjusting the product settings').
The GIGA offers various ways of preparing a speciality coffee, milk or
hot water.
Preparation using the start screen: Simply touch the desired prod-
uct. The following products are displayed as standard on the start
screen:
Page '1/2'
'Espresso'
'Coffee'
'Caffè Barista'
'Lungo Barista'
'Hot water'
'Cappuccino'
'Latte macchiato'
'Portion milk'
Page '2/2'
'Jug of coffee'
'Caffè latte'
'Macchiato'
'Flat White'
'Hot water for green tea'
'2 x Espresso'
'2 x Coffee'
'Portion milk foam'