Descaling The Machine - Jura GIGA X3 Instructions For Use Manual

Descaling the machine

J
T Empty the drip tray and coffee grounds container and put
T Place a receptacle under the dual spout.
T Press the Rotary Switch.
T Open the cover of the filler funnel for ground coffee.
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.
T Press the Rotary Switch.
T Empty the drip tray and coffee grounds container and put
The GIGA builds up deposits of limescale over time and automati-
cally prompts you to descale it when necessary. The degree of calci-
fication depends on the hardness of your water.
E If you are using a CLARIS Pro Smart filter cartridge, you will not
be prompted to descale.
CAUTION If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean water. Should you get
any descaling agent in your eye, see a doctor.
CAUTION If the wrong descaling agent is used, the machine could be dam-
aged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
them back into the machine.
'Press the Rotary Switch'
'Machine is being cleaned', water flows out of the dual spout.
The operation is interrupted,
'Press the Rotary Switch'
'Machine is being cleaned', water flows out of the dual spout
repeatedly.
The operation stops automatically.
'Empty coffee grounds container'
them back into the machine.
Cleaning is now complete. The start screen is displayed.
5 Maintenance
'Add cleaning tablet'.
41