Jura GIGA X3 Instructions For Use Manual page 42

5 Maintenance
4x
42
CAUTION
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling programme to run to the end.
CAUTION
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
T Clean up any splashes immediately.
E The descaling programme lasts approximately 45 minutes.
E JURA descaling tablets are available from specialised dealers.
Precondition: The start screen is displayed.
displayed.
T Touch
T Touch 'Descale'.
T Touch 'Start'.
T Touch
T Empty the drip tray and coffee grounds container and put
T Remove and empty the water tank.
T Completely dissolve 4 JURA descaling tablets in a receptacle
T Pour the solution into the empty water tank and insert it
T Place one receptacle under the dual spout and another
T Press the Rotary Switch.
'Decalcify machine'.
'Descale'
'Start' again.
'Empty drip tray'
them back into the machine.
'Pour descaling agent into water tank'
holding 800 ml of water. This may take several minutes.
into the machine.
'Press the Rotary Switch'
under the hot-water spout.
'Machine is being descaled', water flows straight into the
drip tray and out of the hot-water spout and dual spout
repeatedly.
The operation is interrupted,
'Decalcify machine'
'Empty drip tray'.
is