Jura GIGA X3 Instructions For Use Manual page 13

T Touch 'Save'.
'Saved'
'Water hardness'
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 'Preparing and using for the first
time – Determining the water hardness').
T Move your finger across the display to change the water
hardness setting, e.g. to '25 °dH'.
T Touch 'Save'.
'Saved'
'Insert filter'
T Place one receptacle under the dual spout and another
under the hot-water spout.
T Remove the water tank and rinse it with cold water.
T Open the filter holder.
T Insert the CLARIS Pro Smart filter cartridge into the water
tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
'Filter is being rinsed', the filter is rinsed. Water flows directly
into the drip tray.
'System is filling', water flows out of the dual spout and the
hot-water spout.
'Empty drip tray'
T Empty the drip tray and put it back into the machine.
'Filter operation'
T Place a receptacle under the dual spout.
'Machine is heating'
1 Preparing and using for the first time
/ 'Saved'
13