Cleaning The Bean Container - Jura GIGA X3 Instructions For Use Manual

Cleaning the bean
container
T Empty the drip tray and coffee grounds container and put
them back into the machine.
'Fill water tank'
T Empty the receptacles and place them back under the dual
spout and the hot-water spout.
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
'Press the Rotary Switch'
T Press the Rotary Switch.
'Machine is being
tinued. Water flows straight into the drip tray and out of the
hot-water spout and dual spout repeatedly.
'Empty drip tray'
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. The start screen is displayed.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.
T Press the On/Off button Q to switch the GIGA off.
T Switch the machine off at the power switch.
T Open the service cover on the back of the machine by press-
ing above the JURA logo.
T Push the red sliding catch completely to the rear to close the
bean container.
descaled', the descaling operation is con-
5 Maintenance
43