Maintenance; Rinsing The Machine; Automatic Milk System Rinsing - Jura GIGA X3 Instructions For Use Manual

5 Maintenance

5 Maintenance

Rinsing the machine

Automatic milk system
rinsing
36
Your GIGA has the following integrated maintenance programmes:
U
Rinsing the machine ('Rinse')
U
Rinsing the milk system in the dual spout
U
Cleaning the milk system in the dual spout
('Clean the milk
U
Changing the filter
(only if filter is activated)
U
Cleaning the machine ('Clean')
U
Descaling the machine ('Descale')
E Carry out each maintenance programme when you are
prompted to do so.
E In the interests of hygiene, you should clean the milk system
daily when you have been preparing milk.
You can initiate the rinse operation manually at any time.
Precondition: The start screen is displayed.
T Place a receptacle under the dual spout.
T Touch ' P '.
'Maintenance status'
T Touch 'Maintenance
'Clean'
T Move your finger across the display until
in the centre.
T Touch 'Rinse'
'Machine is
flows out of the dual spout.
The rinse stops automatically. Your GIGA is once more ready
for use.
15 minutes after milk preparation, the milk system is automatically
rinsed.
system')
('Change the filter')
status'.
to start the rinse operation.
rinsing', 'Milk system is being
'Rinse' is displayed
rinsed', water