Permanent Settings In Programming Mode - Jura GIGA X3 Instructions For Use Manual

4 Permanent settings in programming mode

Programme item Sub-item
'Maintenance
status' ('1/4')
'Machine settings'
('2/4')
Touch ' P '
display or turn the Rotary Switch to navigate through the pro-
gramme items and permanently save the desired settings. The fol-
lowing settings can be made:
'Clean',
'Change the filter' (only
if filter is fitted),
'Descale',
'Clean the milk system',
'Rinse',
'Lock display',
'Maintenance information'
'Switch off after'
'Time',
'Date'
'Timer'
'Set consistency of grind'
'Save energy'
'Lock/enable'
'Factory setting'
'Units'
'Display'
'Water hardness'
'Choose language'
'Connect accessory',
'Disconnect accessories'
(Only displayed if the JURA
Smart Connect is being used.)
4 Permanent settings in programming mode
to enter programming mode. Move your finger across the
Explanation
T Start the required maintenance pro-
gramme here.
T Set the time after which the GIGA should
switch off automatically.
T Set the time and date to use the timer
function on your GIGA.
T Specify a switch-on and switch-off time for
each weekday.
T Adjust the consistency of grind to the
coffee beans used.
T Activate energy-saving mode.
T Disable different machine functions.
T Reset the machine to its factory setting.
T Select the unit for the amount of water and
the time format.
T Change the display brightness.
T You can set the water hardness of the water
used.
T Select your language.
T Connect the GIGA wirelessly to a JURA
accessory or disconnect the connection
again.
25