Ground Fault Circuit Interrupter (Gfci) - General Pipe Cleaners Speedrooter 92 Operating Instructions Manual

Hide thumbs Also See for Speedrooter 92:
Table of Contents

Advertisement

Ground Fault Circuit Interrupter (GFCI)

Your machine is equipped with a ground fault circuit interrupter, which
protects you against shock if a short circuit should occur. Check that
receptacle is properly grounded. Test the GFCI before each use.
1.
Plug into 120-volt receptacle.
2.
Push test button. Indicator light will go out and power to machine
should cut off.
3.
If light does not go out when test button is pushed, DO NOT USE
THE MACHINE until proper repairs can be made.
4.
To restore power after test, push reset button. With the reset
button depressed, if the machine doesn't start, stops while run-
ning, or if the operator experiences a mild shock, DO NOT USE
THE MACHINE! Tag the machine out of service and take it to a
motor repair center or return it to the factory for repairs.
THE SECTION OF CORD BETWEEN THE WALL PLUG
AND THE GFCI IS NOT IN THE PROTECTED CIRCUIT.
FEATURES
Truck
Loading
Wheel
Motor
Switch
Stair
Climbers
Wheel
Brake
V-Belt
Drum
Flexitube Spring Distributor Tube
NOTE: Do not operate machine if warning labels on the switch box
and power cord are missing or illegible.
Adjustable Height Handle
Cord Wrap
Belt Guard
Feed Pressure
Control Knob
Feed
Control
Lever
Guide
Tube
Extension
Cutter
Cable Application Chart (Table 1)
Cable Size
Pipe Size
3/4"
4" to 10"
(Large Drum)
5/8"
3" to 6"
(Large Drum)
Cutter Application Chart (Table 2)
Cutter
Cat. #
Cutters for 5/8" and 3/4" Cables
Spear
Head
2"
U-Cutter
3" & 4"
Side
Cutter
Blades
3" Heavy
Duty Saw
Blade
4" Rotary
Saw Blade
Large
Retrieving
Tool
26" Flexible Leader
Note: There are no fixed rules for what cutter to use. If one tool
doesn't take care of a stoppage, simply try another.
5
Speedrooter 92
Typical Applications
Large Drains, Long Runs, Roots
Floor Drains, Roots
Typical Applications
Starting Drill—gets water
SHD
flowing.
2UC
For Cutting and Scraping
3SCB
For Cutting—Scraping walls of
&
pipe.
4SCB
3HDB
For Cutting Roots
4RSB
For Cutting Roots
For removing loose objects or
RTR-2
broken cables.
LE-3
Helps cable get through tight
traps and bends.
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents