Lubrication - Grizzly T32718 Owner's Manual

Lubrication

When lubricating this machine, first clean the
components before lubricating them. This step is
critical because grime and dust build up on lubri-
cated components, which makes them hard to
move. Simply adding more lubricant will not result
in smooth moving parts.
T26419—Syn-O-Gen Synthetic Grease
T26685—Moly-D ISO 32 Multi-Function Oil
T26685
Figure 64. Recommended lubrication products.
Gears
Lubrication Type ... T26419 or NLGI#2 Equivalent
Lubrication Amount ..............................1–2 Dabs
Lubrication Frequency ..............................Weekly
Remove the gear cover and apply a dab of
NLGI#2 grease to the roller gears (see Figure
65). Rotate the crank handle in both directions to
distribute the grease to all the gears, then wipe
away any excess and install the gear cover.
Figure 65. Location of roller gears.
-32-
T26419
Gears
(2 of 4)
Roller Bushings
Lubrication Type ....T26685 or ISO 32 Equivalent
Lubrication Amount ............................ 3–5 Drops
Lubrication Frequency ..............................Weekly
Use an oil can to apply a few drops of ISO 32 oil
to the brass roller bushings on the right side and
into the ball oiler on the top of the left side of the
machine (see Figures 66–67). Rotate the crank
handle in both directions to distribute the oil, then
wipe away any excess.
Figure 66. Location of brass roller bushings.
Ball Oiler
Figure 67. Location of ball oiler.
Model T32718 (Mfd. Since 07/21)
Roller
Bushings