Lubricate Seat Post Adjustment Knob; Preventive Maintenance Tips - Hammer Strength PT-AB Owner's Manual

Hd air bike
Table of Contents

Advertisement

4. Clean the seat with a mild cleaner and soft cloth.
5. Clean seat adjustment rail with a mild cleaner and soft cloth.
6. Lubricate seat adjustment rail with a small amount of lithium grease.

Lubricate Seat Post Adjustment Knob

Perform this task every month.
1. Unscrew seat post adjustment knob from seat tube on frame.
2. Lubricate threads of seat post adjustment knob with lithium grease.

Preventive Maintenance Tips

NOTE: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear.
Keep the equipment out of use until defective parts are repaired or replaced. Pay special attention to parts that are
subject to wear, as outlined below.
REMARQUE : Pour assurer la sécurité du matériel, il convient de l'inspecter régulièrement afin de déceler tout signe
d'usure ou d'endommagement. N'utilisez pas l'appareil avant d'avoir réparé ou remplacé les pièces défectueuses.
Portez une attention toute particulière aux pièces qui s'usent, comme indiqué ci-dessous.
The following preventive maintenance tips will keep the product operating at peak performance:
• Locate the product in a cool, dry place.
• Clean the display console and all exterior surfaces with an approved or compatible cleaner (see Approved and
Compatible Cleaners) and a microfiber cloth.
• Long fingernails may damage or scratch the surface of the console; use the pad of the finger to press the selection
buttons on the console.
• Clean the top surface of the pedals regularly.
Item
1
2
Item
1
Lubricate seat adjustment knob here
2
Page 17 of 22
Description
Seat
Seat adjustment rail
Description
Seat tube on frame
Qty
1
1
Qty
1
1

Advertisement

Table of Contents
loading

Table of Contents