Table of Contents
Advertisement
2D MEMORY
Preload
3 Press the [+/YES] key.
A screen will appear in which you can select the data to
be loaded.
2D MEMORY
1PRG A01"A01 OK?
4 Use the [+/YES] [–/NO] keys to select the data that you
wish to load.
If 1PROG is selected, only a single program will be
loaded. In this case, use the [+/YES] [–/NO] keys to
select the program number to be loaded, and the loading
destination (use the CURSOR [®] key to move).
If PROG is selected, 128 programs will be loaded.
If GLOBAL is selected, Global data (the settings of Glo-
bal mode) will be loaded.
5 Use the CURSOR [®] key to move the cursor to OK?,
and press the [+/YES] key.
The screen will ask for confirmation.
2D MEMORY
Are You Sure OK?
6 Press the [+/YES] key once again.
The data will be loaded.
When the screen indicates "Completed," loading has
been completed.
7 Press the [EXIT] key.
You will return to the screen where you begin the "Pre-
load" process.
3. Synchronization with external MIDI
devices
Settings for synchronization with a connected external
MIDI device are made in Page 3C: MIDI "Clock."
a. Synchronizing an external MIDI device to the
MS2000/MS2000R
You can synchronize an external MIDI device such as a
sequencer or rhythm machine to the tempo of the MS2000/
MS2000R arpeggiator.
1 Use a MIDI cable to connect the MS2000/MS2000R's
MIDI OUT connector to the external MIDI device's
MIDI IN connector ( p.10).
2 Press the [GLOBAL] key to enter Global mode.
3 Press the SELECT [6] key.
The LCD screen will show Page 3C: MIDI "Clock."
3C MIDI
Clock:Internal
4 Use the [+/YES] [–/NO] keys to select Internal.
With a setting of Internal, MIDI Clock messages will be
transmitted from the MS2000/MS2000R at the tempo
specified by the ARPEGGIATOR [TEMPO] knob.
5 Make settings so that the external MIDI device will
OK?
b. Synchronizing the MS2000/MS2000R to an exter-
1 Use a MIDI cable to connect the MS2000/MS2000R's
2 Press the [GLOBAL] key to enter Global mode.
3 Press the SELECT [6] key.
4 Use the [+/YES] [–/NO] keys to select External.
5 Make settings so that the external MIDI device will
4. Saving data on an external device (Data
Various types of data from the MS2000/MS2000R's internal
memory can be transmitted as MIDI exclusive data, and
saved on another connected MIDI device such as a data
filer.
Before you begin, connect a device that is able to receive a
MIDI data dump (a data filer, computer, or another
MS2000/MS2000R unit), and set the global MIDI channels
of both devices to match.
1 Press the [GLOBAL] key.
2 Press the SELECT [8] key.
3 Press the [+/YES] key.
receive MIDI Clock messages from another device
(i.e., so that the external MIDI device will function as a
slave device).
The external MIDI device (sequencer or rhythm
machine) will operate according to the tempo set by the
[TEMPO] knob.
nal MIDI device
MIDI IN connector to the external MIDI device's
MIDI OUT connector ( p.10).
The LCD screen will show Page 3C: MIDI "Clock."
3C MIDI
Clock:External
transmit MIDI Clock messages (i.e., so that the exter-
nal MIDI device will function as a master device).
The sequence or arpeggiator will operate according to
the tempo of the external MIDI device.
For details on synchronization settings for your exter-
nal MIDI device, refer to the owner's manual for your
device.
Dump)
You will enter Global mode.
The LCD screen will show Page 3F: MIDI "MIDI
Dump."
3F MIDI
MIDI Dump
The display will indicate the type of data dump to be
transmitted.
3F MIDI
1PROG
Basic Guide
OK?
OK?
31
Advertisement
Table of Contents
