Playing Arpeggios; Play A Program In Which The Arpeggiator Is Turned On; Using The Knobs And Keys To Modify The Settings - Korg MS2000R Owner's Manual

Korg owner's manual analog modeling synthesizer ms2000, ms2000r
Hide thumbs Also See for MS2000R:
Table of Contents

Advertisement

Playing arpeggios

The MS2000/MS2000R contain a built-in arpeggiator that
sounds an arpeggiated (broken) chord when you hold down
a chord on the keyboard.
When you hold down a chord on the keyboard, it will be sounded
as shown at right (Arpeggio Type: Up)
1. Play a program in which the arpeggia-
tor is turned on
Some of the factory preset programs have the arpeggiator
turned on. Here's how to select and play one of these pro-
grams.
1 Select a program for which the ARPEGGIATOR [ON/
OFF] key is lit.
Programs for which the [ON/OFF] key is lit have the
arpeggiator turned on. The arpeggio type and other set-
tings will be appropriate for the sound of the program.
2 Hold down a chord on the keyboard.
An arpeggio will begin playing.
On the MS2000R if you press the [KEYBOARD] key to
make the key LED light, you will be able to use the
SELECT [1]–[16] keys to play arpeggios ( p.14 "2. Use
the SELECT [1]–[16] keys to play the program").
2. Using the knobs and keys to modify the
settings
You can use the front panel knobs and keys to modify the
arpeggiator settings.
f
a
b
a. Turning the arpeggiator on (off)
Press the ARPEGGIATOR [ON/OFF] key.
When the [ON/OFF] key is lit, the arpeggiator is on.
When it is dark, the arpeggiator is off.
Each time you press the key, the setting will alternate
between on and off.
b. Maintaining the arpeggiator after you release your
hand from the keyboard
Press the [LATCH] key to make the key LED light
(LATCH is on).
When LATCH is on, the arpeggiator will continue play-
ing even after you release your hand from the keyboard.
e
c
d
Each time you press the key, the setting will alternate
between on and off.
c. Setting the pitch range of the arpeggio
1 Press the [RANGE] key.
The pitch range will be displayed in the lower line of the
LCD screen.
Each time you press the key, the pitch range will change
between 1–4 octaves.
A01:MS2000/R
Range:
2 Press the [EXIT] key.
The previous LCD screen will reappear.
d. Selecting the arpeggio type
1 Press the [TYPE] key.
The lower line of the LCD screen will show the arpeggio
type.
Each time you press the key, the arpeggio type will
change.
A01:MS2000/R
Type:
2 Press the [EXIT] key.
The previous LCD screen will reappear.
e. Adjusting the note length (gate time)
Rotate the [GATE] knob.
Rotating the knob toward the right will lengthen the
notes, and rotating it toward the left will shorten them.
f. Adjusting the arpeggiator playback speed
Rotate the [TEMPO] knob.
Rotating the knob toward the right will speed up the
playback speed, and rotating it toward the left will slow
down the playback speed.
The selected speed will be shown in the lower left of the
LCD screen.
A01:MS2000/R
Single
The LED located above the [TEMPO] knob will blink at
quarter note intervals of the MS2000/MS2000R's inter-
nal clock.
The playback speed of the arpeggiator can be synchro-
nized to an external MIDI device. ( Parameter Guide
p.54, Global parameter Page 3C: MIDI "Clock")
g. Other arpeggiator-related settings
The arpeggiator also allows you to set the "Key Sync,"
"Resolution," and "Swing." For details on these parame-
ters, refer to p.27 of the Basic Guide, Editing section "Edit-
ing arpeggio parameters," and Parameter Guide p.45,
Program parameters " ARPEGGIATOR."
Basic Guide
1 Octave
Up
=120
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms2000

Table of Contents